• Home /
  • Guides
  • / How To Install Helmet Lock On Motorcycle In 5 Simple Steps
July 28, 2016

How To Install Helmet Lock On Motorcycle In 5 Simple Steps

Most motorcycles on the road nowadays do not have a helmet lock that is built into the frame. As a result of this, most motorcyclists are forced to carry their helmet with them whenever they get off the bike or stash it on the handlebars without any extra protection.

While the idea of carrying around a few pound helmet might not seem too bad, it becomes quite the nuisance after a few paces. Motorcyclists should add one of the basic modifications to their motorcycle to give them a little easier time when going from place to place with a helmet lock.

You have to maneuver it through doors, and you are essentially one hand short when having to do other tasks. The simplest thing to do is to purchase a helmet lock and install it on the frame of your motorcycle, so that you can leave it there safe and secure, without having to worry about it being stolen or lugging it around all day.

We all know that one friend who purchased a several hundred dollar helmet, left it on the handle bars thinking that it wouldn’t go anywhere, and was gone when they came back.

Some helmet locking options people use are long chains, padlocks, or other miscellaneous items that take up just as much space as the helmet itself. Some locks that people use are almost as heavy as the helmet itself, and while they do provide the proper protection from wannabe thieves, they add unnecessary weight.

Don’t let that be you, and just follow these simple steps to install a clean and efficient helmet lock on your motorcycle.

 5 Steps To Install Helmet Lock On Your Motorcycle

Step 1: Gather Required Tools

Photo Credit: Amazon.com

The helmet lock that we recommend is the Bikers Choice Helmet Lock 74937S2. It is a safe and secure lock that comes with two keys, two tamper proof screws, universal fittings for a 7/8th to 1 and ¼ inch frame tubing. The necessary tools that you will be using for installation is a flat head screwdriver.

Step 2: Find a Secure Location

installing a helmet lock

Photo Credit: youtube.com

Finding the proper location is half the battle when installing a helmet lock. You want to place the helmet lock at an appropriate spot where it won’t hamper your operation of the bike, or get in the way of any gauges and moving parts.

In addition, you want to take the time to find a place where you can clip the helmet into place, and it won’t dangle and sit on any part of the exhaust. The helmet will sustain damage if it is rested on any heated surface, even after a short ride.

Some locations we recommend are the front handlebars and the frame position that is far enough away from the exhaust or muffler to rest properly.

Step 3: Clean the Mounting Location

You’ve found a position in which you are comfortable mounting the helmet lock. Now you want to take the time to clean the area a bit. Remove any dust or flaws from the area, and dry it properly.

The goal is to make sure that the mounting installation doesn’t have a slippery surface, which could cause the helmet to rock back and forth when attached, and scratch the frame area.

Step 4: Mount The Helmet Lock

After you have successfully cleaned the area and you are satisfied with where you’ll be mounting the helmet lock, attach the helmet lock and secure the screws into place with the flathead screwdriver. Leave the screws relatively loose and positon the helmet lock to how you would like it to be.

Mount the helmet lock

Photo Credit: pirateslair.net

Some individuals prefer the helmet lock to be straight up, straight down, or to the side even with the ground. Just make sure that the position you secure it, will be where the D-ring goes through, and will dangle the helmet from. In other words, make sure once again that the position you secure it in, will not cause the helmet to suffer any damage from touching any moving parts or heated areas.

Once you have decided which position you wish to secure it in, tighten down the screws to make sure that the helmet lock doesn’t move. Tug on the helmet lock lightly to make sure it won’t go anywhere, and then check one more time to make sure the helmet lock is secure. The next step is to test the helmet lock.

Step 5: Test the Helmet Lock

Now comes the time to see if the new helmet lock you have installed will hold up to the weight of the helmet. Unlock the helmet lock and open the hook. From there, place your D-Ring inside the hook and then secure the hook back into place.

Place your key inside the locking mechanism and lock the helmet into place. Use one hand to hold the helmet into place, and the other to turn the key of the helmet lock.

This is to prevent the helmet from dropping and scratching if the helmet lock doesn’t lock immediately. The last thing you want is to drop the helmet and scratch it up. After all, you want it to be securely mounted.

Once you have the helmet securely fastened inside the helmet lock, take a step back and see if you are pleased with the results. Take care to make sure that the helmet is away from the heating sources we mentioned, along with moving parts. If you are unhappy with the position, luckily most helmet locks are easy to uninstall and relocate.


Helmet locks are a great way to prevent wannabe criminals from taking the most important piece of gear that a rider can wear, his helmet. They can help to lighten the load of some of the equipment you have to carry, along with alleviating some of the worry of the helmet potentially falling off the steering column as well. Arguably a helmet lock is one of the most underrated modifications to a motorcycle that should be added right away to any bike on the road.

Click Here to Leave a Comment Below

Leave a Reply: